Abstract: ABSTRACT Coffee berry disease (CBD), caused by Colletotrichum kahawae, is a major constraint for Arabica coffee cultivation in Africa. The disease is specific to green berries and can lead to 60% harvest losses. In Cameroon, mixed cropping systems of coffee with other crops, such as fruit trees, are very widespread agricultural practices. Fruit trees are commonly planted at random on coffee farms, providing a heterogeneous shading pattern for coffee trees growing underneath. Based on a recent study of CBD, it is known that those plants can reduce disease incidence. To assess the specific effect of shade, in situ and in vitro disease development was compared between coffee trees shaded artificially by a net and trees located in full sunlight. In the field, assessments confirmed a reduction in CBD on trees grown under shade compared with those grown in full sunlight. Artificial inoculations in the laboratory showed that shade did not have any effect on the intrinsic susceptibility of coffee berries to CBD. Coffee shading mainly acts on environmental parameters in limiting disease incidence. In addition to reducing yield losses, agroforestry system may also be helpful in reducing chemical control of the disease and in diversifying coffee growers' incomes.

Abstract: BACKGROUND: Mirids are a major constraint to cocoa growing in Africa. Cocoa breeding for tolerance/resistance could be effective in an integrated pest management system. Attractiveness is one aspect of tolerance/resistance, and decreasing the attractiveness of cocoa trees should be a good way of reducing damage. RESULTS: Small-scale laboratory tests were carried out in Cameroon to assess differences in the attractiveness to mirids of eleven cocoa genotypes. The genotypes were ranked according to their attractiveness score and a distance from a mean value. An analysis of variance was performed and revealed significant differences between cocoa genotypes (F=3.15, P<0.001). The cocoa genotype groupings revealed three major categories, with BE10 and SNK413 proving to be the most attractive. In contrast, five genotypes, IMC60, the Catongo Trinitario genotypes, Playa Alta2 (from Venezuela), SIC5 and SNK614, proved to be less attractive than the mean. Four genotypes (PA107, SNK619, UPA134 and T60/887) displayed similar attractiveness to the mean. CONCLUSION: The circular microtest offered the advantage of not needing a reference cocoa genotype. The least attractive clones, such as IMC60, were also the most tolerant in the field. Comparisons with the results of other studies are proposed.

Abstract: The present study aimed to dissect tree architectural plasticity into genetic, ontogenetic and environmental effects over the first 4 yr of growth of an apple (Malus x domestica) F1 progeny by means of mixed linear modelling of repeated data. Traits related to both growth and branching processes were annually assessed on different axes of the trees planted in a staggered-start design. Both spatial repetitions, (i.e. different axis types) and temporal repetitions (i.e. successive ages of trees) were considered in a mixed linear model of repeated data. A significant genotype effect was found for most studied traits and interactions between genotype and year and/or age were also detected. The analysis of repeated temporal measures highlighted that the magnitude of the decrease in primary growth is mainly determined by the first year of growth, and the decrease in bottom diameter increment is concomitant with the first fruiting occurrence. This approach allowed us to distinguish among the traits that were under genetic control, those for which this control is exerted differentially throughout tree life or depending on climatic conditions or an axis type. Mapping quantitative trait loci (QTL) that are specific to these different effects will constitute the next step in the research.

Abstract: ABSTRACT We monitored the development of American leaf spot of coffee, a disease caused by the gemmiferous fungus Mycena citricolor, in 57 plots in Costa Rica for 1 or 2 years in order to gain a clearer understanding of conditions conducive to the disease and improve its control. During the investigation, characteristics of the coffee trees, crop management, and the environment were recorded. For the analyses, we used partial least-squares regression via the spline functions (PLSS), which is a nonlinear extension to partial least-squares regression (PLS). The fungus developed well in areas located between approximately 1,100 and 1,550 m above sea level. Slopes were conducive to its development, but eastern-facing slopes were less affected than the others, probably because they were more exposed to sunlight, especially in the rainy season. The distance between planting rows, the shade percentage, coffee tree height, the type of shade, and the pruning system explained disease intensity due to their effects on coffee tree shading and, possibly, on the humidity conditions in the plot. Forest trees and fruit trees intercropped with coffee provided particularly propitious conditions. Apparently, fertilization was unfavorable for the disease, probably due to dilution phenomena associated with faster coffee tree growth. Finally, series of wet spells interspersed with dry spells, which were frequent in the middle of the rainy season, were critical for the disease, probably because they affected the production and release of gemmae and their viability. These results could be used to draw up a map of epidemic risks taking topographical factors into account. To reduce those risks and improve chemical control, our results suggested that farmers should space planting rows further apart, maintain light shading in the plantation, and prune their coffee trees.

Abstract: BACKGROUND: Yield capacity is a target trait for selection of agronomically desirable lines; it is preferred to simple yields recorded over different harvests. Yield capacity is derived using certain architectural parameters used to measure the components of yield capacity. METHODS: Observation protocols for describing architecture and yield capacity were applied to six clones of coffee trees (Coffea canephora) in a comparative trial. The observations were used to establish architectural databases, which were explored using AMAPmod, a software dedicated to the analyses of plant architecture data. The traits extracted from the database were used to identify architectural parameters for predicting the yield of the plant material studied. CONCLUSIONS: Architectural traits are highly heritable and some display strong genetic correlations with cumulated yield. In particular, the proportion of fruiting nodes at plagiotropic level 15 counting from the top of the tree proved to be a good predictor of yield over two fruiting cycles.

Abstract: ABSTRACT Field observations were conducted from 1998 to 2001 at the International Cocoa Genebank, Trinidad, to evaluate 57 cacao clones for resistance to black pod (BP) and witches'-broom (WB) diseases (caused by Phytophthora sp. and Crinipellis perniciosa, respectively). Each month ripe pods were harvested and the number of healthy and diseased was recorded. The number of brooms on vegetative shoots was recorded three times a year on selected branches. Twenty-three clones showed less than 10% of infection for both BP and WB on pods. Among those, eight clones showed an absence of brooms on the observed branches: IMC 6, MAN 15/60 [BRA], PA 67 [PER], PA 195 [PER], PA 218 [PER], PA 296 [PER], PA 303 [PER], and POUND 32/A [POU]. Broad-sense heritability was estimated at 0.38 and 0.57 for WB disease on pods and shoots, respectively, and at 0.51 for BP disease. Genetic correlation between WB disease on pods and on shoots was low and estimated at 0.39, whereas the correlation between WB and BP diseases on pods was 0.48. To choose putative parents for breeding schemes, it is suggested that clones are first assessed for their level of resistance to WB on shoots, and the most promising individuals are screened for BP with a detached pods test. Further studies are needed to confirm whether the level of resistance to WB on pods can be predicted using an early test on seedlings.

Abstract: Rubber has been grown for several decades in Africa, notably in Ivory Coast. Although the yields obtained with selected clones are good, some problems with adaptation to edaphic and climatic conditions have yet to be solved. Of these problems, tree breakage due to violent winds during frequent storms is a major handicap. Some clones are more resistant to wind damage. However, this resistance trait remains difficult to measure, and detecting it at an early stage appeared important. As no differences have been found in the physical properties of the wood of different clones, the search for differences between clones displaying resistance and susceptibility to wind damage was switched to architectural structures. Architectural traits were thus studied on two rubber clones with very different resistances to wind. Observations were focused both on young trees and adult trees. Of all the architectural traits observed, a description of branching provided information likely to explain differences in the way the clones being studied developed over time. The clone GT1 which is resistant to wind, developed more lateral branches but they did not grow much in length. On the other hand, fewer axillary branches appeared on the susceptible clone PB235 but they grew longer. Moreover, as some of these traits proved to be similar in both young and adult trees, they could be detected at a sufficiently early stage for use as early prediction traits, if their involvement in susceptibility to wind damage is confirmed.

Abstract: In order to evaluate twelve doubled haploids (DHs) of Theobroma cacao L. used as parents, a trial was set up in Côte d'Ivoire. Several traits were observed, such as yield, vigour, yield/vigour ratios, resistance to the black pod disease caused by Phytophthora, percentage of flat beans and mean weight of 100 cocoa beans. Out of the three progenies derived from crosses between two DHs, two showed severe drawbacks. A reduction of the heterogeneity within these progenies was occasionally observed for some of the traits, but failed to be consistent. When tested as female parents in combination with diploid testers, some of the DHs showea significantly higher combining value than their parents for traits such as the mean weight of 100 beans and the yield/canopy surface ratio. The results showed the potential of DHs to improve selected parents in only one cycle of selection but more crosses between two DHs need to be tested in order to evaluate potential of the resulting F(1) progenies.

Abstract: The genetic parameters of several agronomic traits were estimated in Coffea canephora in a triangular diallel with six parents and in a partial diallel with 18 parents. The yield data came from harvests obtained over 14 years divided into an initial 6-year cycle, a second cycle of 5 years after cutting back and a third cycle of 3 years after topping. Risk incidence was also observed over several years. The general combining abilities (GCA) were the principal sources of variation for the various traits considered. Parents derived from the Yangambi selections (Democratic Republic of Congo) proved to be best for yields in the three cropping cycles. The rank correlations between the GCA of the various traits indicated that first-cycle production was still not enough to predict the GCA for yield over 14 years. Susceptibility to leaf anthracnose and to drought could lead to modifications in successive classifications, with a more significant impact on production during the first cycle. The differences in susceptibility to Coffee Berry Borers had an impact on yield, which increased in line with coffee tree age. There was a rather good relation between inherent values and values in parent combinations and it was thus possible to choose parents on their own performance.

Abstract: The coffee berry borer, Hypothenemus hampei (Ferrari) (Coleoptera: Scolytidae), which exists in all coffee producing zones, is a major pest. The seriousness of this scolytid was assessed in Togolese plots spread over five agroclimatic zones, by determining the attack rate from a sample of coffee trees. The work was carried out over 2 yr and revealed that weight losses were proportional to the attack rates. The average infestation rates were 5.64% in the first year and 6.36% in the second year, while total production losses amounted to 2.60% and 3.18%, respectively, for the same periods. Generally speaking, attack rates in the plots were low and varied considerably within a given zone. Plantations located on plateau were more severely attacked than those in the plains. A relationship was established between total losses and the cost of insecticide treatment; this relationship was used to calculate an economic damage threshold beyond which control proves to be cost effective.