Abstract: A decentralized power generation plant fuelled by straight jatropha oil was implemented in 2006 in Ranidhera, Chhattisgarh, India. The goal of this study was to assess the environmental sustainability of that electrification project in order to provide a scientific basis for policy decisions on electrifying remote villages. A full Life Cycle Assessment (LCA) was conducted on jatropha-based rural electrification and then compared with other electrification approaches such as photovoltaic (PV), grid connection and a diesel-fuelled power generator. In summary, the jatropha-based electrification in Ranidhera reduces greenhouse gas emissions over the full life cycle by a factor of 7 compared to a diesel generator or grid connection. The environmental performance is only slightly improved, mainly due to the high air pollution from pre-heating the jatropha seeds. With additional measures oil extraction and overall efficiency could be further improved. However, environmental benefits can only be achieved if jatropha is cultivated on marginal land and land use competition can be excluded. Under these conditions, jatropha-based electricity generation might be a useful alternative to other renewable electrification options, as the technology is very sturdy and can be maintained even in remote and highly under-developed regions.
Abstract: Mit der Austeilung von Emissionsrechten sind alle Zutaten für einen Emissionshandel in der Schweiz vorhanden. Gleichzeitig herrscht ein grosses Mass an Unsicherheit über die weitere Ausgestaltung nationaler und internationaler Klimapolitik für die Zeit nach Ablauf des Kyotoprotokolls 2012. Für die Schweizer Unternehmen stellt sich die Frage, wie sie sich in diesem Umfeld verhalten sollen. Ein Blick in die EU zeigt einen dynamischen Markt, der global an Momentum gewinnen wird, unabhängig vom Ausgang der Verhandlungen der Vereinten Nationen.
Abstract: A life cycle assessment was carried out based on a detailed life cycle inventory for a typical GSM 900 mobile phone network and related End of Life (EOL) treatment infrastructure. The environmental relevance of the three life cycle phases: production, use and EOL treatment was analysed using IMPACT2002+. The environmentally preferable EOL treatment alternative was identified on the basis of six previously developed EOL treatment scenarios. The results indicate that the environmental impacts attributable to the use phase dominate the environmental impacts incurred over the entire life cycle of the network. The impacts of the production phase are primarily attributable to the energy intensive manufacturing of printed wiring boards (PWB). The EOL phase dominates the impacts on ecosystem quality. In particular the longterm emissions of heavy metals have critical effects. Detailed analysis of the EOL phase shows that recycling of network materials in general leads to a two fold reduction of environmental impacts: in the EOL phase itself as well as by means of the avoided primary production of materials recovered in the EOL phase. An increase in the material quality of the secondary precious and rare materials leads to a significant reduction in the impacts on human health. (c) 2005 Elsevier Inc. All rights reserved.
Abstract: Goal, Scope and Background. The ecoinvent database provides harmonised generic life cycle inventories for metal production and processing. They can be used as background data for different LCA applications. The goal of this paper is to provide an overview of the metals inventoried in ecoinvent. Beside, some methodological background information is given. The focus lies on a new methodology developed to inventorying joint resources. The implementation is shown in a case study of the production of primary copper on a global average. The respective process is assessed with Eco-indicator 99 (H,A) to identify dominant impacts within the production chain. Methods. In ecoinvent, a coupled production is inventoried in multi output unit processes. For database calculation, an allocation by economic revenue is applied. Elementary flows for resources, especially joint resources, include information oil type and quality of the resources. Results and Conclusion. With the presented method, the extraction of resources can be valuated based on the cost of restoration or the change in the future impact due to the extraction of a specific resource. The case study indicates, for copper / molybdenum production, that the mineral extraction is of minor importance compared to the metallurgical step according to the LCIA results. Air emissions of heavy metals are identified as main impacts. Also, the resource depletion shows a notable impact. The environmental impacts of metals from sulphidic ores, however, are underestimated by neglecting emissions from tailings for lack of reliable data. Recommendation and Perspective. Impact assessment methods will have to be updated to account for different grades of ore. The ecoinvent database should be enlarged by more inventories of technically important metals and alloys, e.g. by gold, silver, solders, etc. for the electronics industry and by specific steel and aluminium alloys. Reliable composition data of sulphidic tailings and transfer coefficients for their disposal considering Acidic Rock Drainage (ARD) are to be developed as well.
