Abstract: The debilitating effects of rotator cuff tears and the high incidence of failure associated with current grafts underscore the clinical demand for functional solutions for tendon repair and augmentation. To address this challenge, we have designed a poly(lactide-co-glycolide) (PLGA) nanofiber-based scaffold for rotator cuff tendon tissue engineering. In addition to scaffold design and characterization, the objective of this study was to evaluate the attachment, alignment, gene expression, and matrix elaboration of human rotator cuff fibroblasts on aligned and unaligned PLGA nanofiber scaffolds. Additionally, the effects of in vitro culture on scaffold mechanical properties were determined over time. It has been hypothesized that nanofiber organization regulates cellular response and scaffold properties. It was observed that rotator cuff fibroblasts cultured on the aligned scaffolds attached along the nanofiber long axis, whereas the cells on the unaligned scaffold were polygonal and randomly oriented. Moreover, distinct integrin expression profiles on these two substrates were observed. Quantitative analysis revealed that cell alignment, distribution, and matrix deposition conformed to nanofiber organization and that the observed differences were maintained over time. Mechanical properties of the aligned nanofiber scaffolds were significantly higher than those of the unaligned, and although the scaffolds degraded in vitro, physiologically relevant mechanical properties were maintained. These observations demonstrate the potential of the PLGA nanofiber-based scaffold system for functional rotator cuff repair. Moreover, nanofiber organization has a profound effect on cellular response and matrix properties, and it is a critical parameter for scaffold design.
Abstract: Interface tissue engineering is a promising new strategy aimed at the regeneration of tissue interfaces and ultimately enabling the biological fixation of soft tissue grafts used in orthopedic repair and sports medicine. Many ligaments and tendons with direct insertions into subchondral bone exhibit a complex enthesis consisting of several distinct yet continuous regions of soft tissue, noncalcified fibrocartilage, calcified fibrocartilage, and bone. Regeneration of this multi-tissue interface will be critical for functional graft integration and improving long-term clinical outcome. This review highlights current knowledge of the structure-function relationship at the interface, the mechanism of interface regeneration, and the strategic biomimicry implemented in stratified scaffold design for interface tissue engineering and multi-tissue regeneration. Potential challenges and future directions in this emerging field are also discussed. It is anticipated that interface tissue engineering will lead to the design of a new generation of integrative fixation devices for soft tissue repair, and it will be instrumental for the development of integrated musculoskeletal tissue systems with biomimetic complexity and functionality.
Abstract: Biological fixation of soft tissue-based grafts for anterior cruciate ligament (ACL) reconstruction poses a major clinical challenge. The ACL integrates with subchondral bone through a fibrocartilage enthesis, which serves to minimize stress concentrations and enables load transfer between two distinct tissue types. Functional integration thus requires the reestablishment of this fibrocartilage interface on reconstructed ACL grafts. We designed and characterized a novel mechanoactive scaffold based on a composite of poly-alpha-hydroxyester nanofibers and sintered microspheres; we then used the scaffold to test the hypothesis that scaffold-induced compression of tendon grafts would result in matrix remodeling and the expression of fibrocartilage interface-related markers. Histology coupled with confocal microscopy and biochemical assays were used to evaluate the effects of scaffold-induced compression on tendon matrix collagen distribution, cellularity, proteoglycan content, and gene expression over a 2-week period. Scaffold contraction resulted in over 15% compression of the patellar tendon graft and upregulated the expression of fibrocartilage-related markers such as Type II collagen, aggrecan, and transforming growth factor-beta3 (TGF-beta3). Additionally, proteoglycan content was higher in the compressed tendon group after 1 day. The data suggest the potential of a mechanoactive scaffold to promote the formation of an anatomic fibrocartilage enthesis on tendon-based ACL reconstruction grafts.
Abstract: Soft tissues such as ligaments and tendons integrate with bone through a fibrocartilaginous interface divided into noncalcified and calcified regions. This junction between distinct tissue types is frequently injured and not reestablished after surgical repair. Its regeneration is also limited by a lack of understanding of the structure-function relationship inherent at this complex interface. Therefore, focusing on the insertion site between the anterior cruciate ligament (ACL) and bone, the objectives of this study are: (i) to determine interface compressive mechanical properties, (ii) to characterize interface mineral presence and distribution, and (iii) to evaluate insertion site-dependent changes in mechanical properties and matrix mineral content. Interface mechanical properties were determined by coupling microcompression with optimized digital image correlation analysis, whereas mineral presence and distribution were characterized by energy dispersive x-ray analysis and backscattered scanning electron microscopy. Both region- and insertion-dependent changes in mechanical properties were found, with the calcified interface region exhibiting significantly greater compressive mechanical properties than the noncalcified region. Mineral presence was only detectable within the calcified interface and bone regions, and its distribution corresponds to region-dependent mechanical inhomogeneity. Additionally, the compressive mechanical properties of the tibial insertion were greater than those of the femoral. The interface structure-function relationship elucidated in this study provides critical insight for interface regeneration and the formation of complex tissue systems.
Abstract: Biological fixation of orthopedic soft tissue grafts to bone poses a significant clinical challenge. The clinical success of soft tissue-based grafts for anterior cruciate ligament (ACL) reconstruction is limited by the lack of functional graft integration with subchondral bone. Soft tissues such as the ACL connect to subchondral bone via a complex interface whereby three distinct tissue regions (ligament, fibrocartilage, and bone) work in concert to facilitate load transfer from soft to hard tissue while minimizing stress concentration at the interface. Although a fibrovascular tissue forms at the graft-to-bone interface following surgery, this tissue is nonphysiologic and represents a weak link between the graft and bone. We propose that the re-establishment of the native multi-tissue interface is essential for biological graft fixation. In vivo observations and our in vitro monolayer co-culture results suggest that osteoblast-fibroblast interaction is important for interface regeneration. This study focuses on the design of a triphasic scaffold system mimicking the multi-tissue organization of the native ACL-to-bone interface and the evaluation of osteoblast-fibroblast interactions during three-dimensional co-culture on the triphasic scaffold. We found that the triphasic scaffold supported cell proliferation, migration and phenotypic matrix production while maintaining distinct cellular regions and phase-specific extracellular matrix deposition over time. This triphasic scaffold is designed to guide the eventual reestablishment of an anatomically oriented and mechanically functional fibrocartilage interfacial region directly on biological and synthetic soft tissue grafts. The results of this study demonstrate the feasibility of multi-tissue regeneration on a single scaffold, and the potential of interface tissue engineering to enable the biological fixation of soft tissue grafts to bone.
Abstract: The anterior cruciate ligament (ACL) connects the femur to the tibia through direct insertion sites and functions as the primary restraint to anterior tibial translation. The ACL-to-bone insertion sites exhibit a complex structure consisting of four zones of varied cellular and matrix components, consisting of ligament, non-mineralized fibrocartilage, mineralized fibrocartilage and bone, which allow for the effective load transfer from ligament to bone, thereby minimizing stress concentrations and preventing failure. The mineral content and distribution within the fibrocartilage region may be an important structural component of the insertion site which may influence the mechanical properties. The goals of this study are to characterize the compressive mechanical properties of the fibrocartilage region of the ACL-to-bone insertion site and evaluate how the mineral distribution at the interface relates to these compressive properties. In order to determine the compressive mechanical properties we have utilized a novel microscopic mechanical testing method combined with digital image correlation and employed energy dispersive X-ray analysis (EDAX) in order to evaluate the mineral content and distribution across the femoral and tibial insertion sites. The results reveal that a regional mineral gradient is observed across the fibrocartilage which corresponds to depth-dependent variations in compressive mechanical properties. This depth- dependent mechanical inhomogeneity strongly correlates to the increase in mineral content of the mineralized fibrocartilage (MFC) region compared to the non-mineralized fibrocartilage (NFC). Additionally, the tibial NFC and MFC mechanical properties are greater than those of the femoral NFC and MFC which corresponds to a greater mineral content in the NFC and MFC regions of the tibial insertion. The findings of this study suggest that a structure-function relationship exists at the ACL-to-bone interface.
Abstract: In this study amino-terminated poly(ethylene glycol) (PEG-diamine) hydrogels were crosslinked with genipin, a chemical naturally derived from the gardenia fruit. Dissolution, swelling, and PEG-genipin release properties were determined. The dissolution studies indicated that the hydrogels are water soluble, and that the dissolution rate was concentration, mass, and temperature dependent. The dissolution rates are easily tailored from 3 min to >100 days. The PEG-genipin release study indicated that the greatest release occurs within the first 24 h of immersion in water, and that incubation at 37 degrees C elicits a greater initial release than samples incubated at room temperature for all genipin concentrations. Through scanning electron microscopy it was observed that the hydrogels are porous, and surface morphology changes before and after swelling. Furthermore, smooth muscle cell (SMC) adhesion studies indicated that the PEG-genipin hydrogel is a suitable substrate for SMC seeding. Overall, the results of these studies indicate that PEG-genipin hydrogels may provide potential scaffolding for a variety of tissue engineering applications.
