Frédéric DUBAS - Publications List

Journal articles

2011

R P PRAVEEN, M H RAVICHANDRAN, V T SADASIVAN ACHARI, V P JAGATHY RAJ, G MADHU, G R BINDU, F DUBAS (2011) Optimal Design of a Surface Mounted Permanent-Magnet BLDC Motor for Spacecraft Applications International Review of Electrical Engineering (IREE) 6: 5. 2318-2328 September/October

Abstract:

Notes:

2009

2007

Conference papers

2012

2011

F DUBAS, C ESPANET (2011) Slotting Effect in Permanent-Magnet Motors via a 2-D Exact Sub-Domain Model In: Proc. ELECTRIMACS 01-09

Abstract:

Notes:

F CHARIH, F DUBAS, P BIGOT, R BERNARD, C ESPANET (2011) Étude de la réduction des pertes électromagnétiques d'un MSAP à fort couple et à encoches ouvertes In: Proc. Electrotechnique du Futur (EF) 01-09

Abstract:

Notes:

2010

2009

F DUBAS, C ESPANET (2009) Semi-Analytical Solution of Cogging Torque in SMPMM In: Proc. COMPUMAG 01-02

Abstract:

Notes:

F DUBAS, C ESPANET (2009) Semi-Analytical Solution of 2-D Rotor Eddy-Current Losses due to the Slotting Effect in SMPMM In: Proc. COMPUMAG 01-02

Abstract:

Notes:

2008

F DUBAS, A SARI, D HISSEL, C ESPANET (2008) A Comparison between CG and PSO Algorithm for the Design of a PM Motor for Fuel Cell Ancillaries In: Proc. IEEE Véhicular Power and Propulsion (VPP) 01-07

Abstract:

Notes:

2007

2005

2004

2003

PhD theses

2006

Prize Paper Award

2005

F DUBAS, C ESPANET, A MIRAOUI (2005) Design of a High-Speed Permanent Magnet Motor for the Drive of a Fuel Cell Air-Compressor [Prize Paper Award]

Abstract:

Notes:


Journal articles

2011	R P PRAVEEN, M H RAVICHANDRAN, V T SADASIVAN ACHARI, V P JAGATHY RAJ, G MADHU, G R BINDU, F DUBAS (2011) Optimal Design of a Surface Mounted Permanent-Magnet BLDC Motor for Spacecraft Applications International Review of Electrical Engineering (IREE) 6: 5. 2318-2328 September/October Abstract: Notes:
	H C M MAI, F CHARIH, F DUBAS, D CHAMAGNE, C ESPANET (2011) Comparaison de deux types de bobinage pour MSAP – Application à la propulsion d’un véhicule hybride urbain European Journal of Electrical Engineering (EJEE) - Revue internationale de Génie Electrique (RIGE), 14: 2-3. 255-285 August Abstract: Notes:
2009	F DUBAS, C ESPANET (2009) Analytical Solution of the Magnetic Field in Permanent-Magnet Motors Taking Into Account Slotting Effect: No-Load Vector Potential and Flux Density Calculation IEEE Trans. on Magn. 45: 5. 2097-2109 May Abstract: Notes:
2007	F DUBAS, C ESPANET (2007) Exact Analytical Model of the No-Load Flux Density in the Air-gap, the Permanent Magnets and the Rotor Yoke for the Surface Mounted Permanent Magnet Motors International Review of Electrical Engineering (IREE) 2: 3. 425-437 May/June Abstract: Notes:
	DOI F DUBAS, C ESPANET, A MIRAOUI (2007) An Original Analytical Expression of the Maximum Magnet Thickness in Surface Mounted Permanent Magnet Motors, Eur. Phys. J. Appl. Phys. (EPJAP) 38: 2. 169-176 May Abstract: Notes:
Conference papers

2012	C ESPANET, H C M MAI F DUBAS, D CHAMAGNE, R BERNARD, P BIGOT (2012) In-Wheel Motor for a Small Hybrid Electric Vehicle: Design, Realization and Experimental Characterization In: Proc. IEEE Energy Conversion Congres & Exposition (ECCE) Accepted Paper Abstract: Notes:
	F CHARIH, F DUBAS, C ESPANET, D CHAMAGNE (2012) Performances Comparison of Permanent-Magnet Machines with Different Rotor Topologies and Similar Slot and Pole Numbers In: Proc. International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) Accepted Paper Abstract: Notes:
	R - B MIGNOT, F DUBAS, C ESPANET, D CHAMAGNE (2012) Design of a Synchronous Motor with Axial Flow for Traction Motor via an Analytical Model for Network Reluctances In: Proc. IEEE Véhicular Power and Propulsion (VPP) Accepted Paper Abstract: Notes:
	A SOUALMI, F DUBAS, D DEPERNET, A RANDIA, C ESPANET (2012) Study of Copper Losses in the Stator Windings and PM Eddy-Current Losses for PM Synchronous Machines Taking Into Account Influence of PWM Harmonics In: Proc. International Conference on Electrical Machines and Systems (ICEMS) Accepted Paper Abstract: Notes:
	R - B MIGNOT, F DUBAS, C ESPANET, D CHAMAGNE (2012) Synchronous Motor for control of various organs in a car: Finite Element Model, Virtual Prototype and Experimental Testing In: Proc. International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) Accepted Paper Abstract: Notes:

	A SOUALMI, F DUBAS, D DEPERNET, A RANDIA, C ESPANET (2012) Performances Characteristics of Interior Permanents Magnets Synchronous Machines (IPMSM) with Distributed Windings: Railway Application In: Proc. International Conference on Electrical Machines (ICEM) Accepted Paper Abstract: Notes:
	R - B MIGNOT, F DUBAS, C ESPANET, D CHAMAGNE (2012) Design of axial flux PM motor for electric vehicle via a magnetic equivalent circuit In: Proc. IEEE Renewable Energies and Vehicular Technology (REVET) 212-217 Abstract: Notes:
	C ANDAGNOTTO, R BERNARD, P BIGOT, C COLANCON, X COTHENET, F DUBAS, C ESPANET, D FERRER, D LOUKAKOU, J - C MATHAE, L MULLER, F QUESADA (2012) PHEBUS Vehicle: a small urban PHEV In: Proc. IEEE Véhicular Power and Propulsion (VPP) Accepted Paper Abstract: Notes:
	A SOUALMI, F DUBAS, D DEPERNET, A RANDIA, C ESPANET (2012) Inductances Estimation in the d-q Axis for an Interior Permanent-Magnet Synchronous Machines (IPMSM) with Distributed Windings In: Proc. International Conference on Electrical Machines (ICEM) Accepted Paper Abstract: Notes:
2011	M L SOUGH, G GAULTIER, D DEPERNET, F DUBAS, B BOUALEM, C ESPANET (2011) High Frequency PMSM and Inverter Losses Analysis: Application to Flywheel System on Real Cycle Operation In: Proc. IEEE Véhicular Power and Propulsion (VPP) 01-05 Abstract: Notes:
	F DUBAS, C ESPANET (2011) Slotting Effect in Permanent-Magnet Motors via a 2-D Exact Sub-Domain Model In: Proc. ELECTRIMACS 01-09 Abstract: Notes:
	R P PRAVEEN, M H RAVICHANDRAN, V T SADASIVAN ACHARI, V P JAGATHY RAJ, G MADHU, G R BINDU, F DUBAS (2011) Optimal Design of a surface mounted Permanent Magnet BLDC Motor for Spacecraft Applications In: Proc. IEEE Emerging Trends in Electrical and Computer Technology (ICETECT) 413-419 Abstract: Notes:
	M L SOUGH, F DUBAS, D DEPERNET, B BOUALEM, C ESPANET (2011) Analytical Modeling of 2-D Permanent-Magnet Losses Harmonic Equivalent Resistance of PM In: Proc. International Conference on Electrical Machines and Systems (ICEMS) 01-04 Abstract: Notes:
	M L SOUGH, D DEPERNET, F DUBAS, C ESPANET, B BOUALEM (2011) Analytical Model of PMSM Designed for High-Frequency Operation 'Machine and Inverter Sizing Compromise' In: Proc. IEEE Energy Conversion Congres & Exposition (ECCE) 1436-1440 Abstract: Notes:
	M L SOUGH, F DUBAS, D DEPERNET, C ESPANET, B BOUALEM (2011) Modélisation Analytique des Courants de Court-circuit et Calcul de Pertes dans les Aimants Permanents en régimes déséquilibrés In: Proc. Electrotechnique du Futur (EF) 01-07 Abstract: Notes:

	A SOUALMI, F DUBAS, D DEPERNET, A RANDIA, C ESPANET (2011) Comparative Study of Permanent-Magnet Synchronous Machines with Concentrated Windings for Railway Application In: Proc. International Conference on Electrical Machines and Systems (ICEMS) 01-05 Abstract: Notes:
	F CHARIH, F DUBAS, P BIGOT, R BERNARD, C ESPANET (2011) Étude de la réduction des pertes électromagnétiques d'un MSAP à fort couple et à encoches ouvertes In: Proc. Electrotechnique du Futur (EF) 01-09 Abstract: Notes:
	G GAULTIER, F DUBAS, B BOUALEM, C ESPANET (2011) Calcul Rapide des Pertes Fer Supplémentaires Dans Les Moteurs Asynchrones (MAS) en Alimentation par MLI In: Proc. Electrotechnique du Futur (EF) 01-08 Abstract: Notes:
2010	H C M MAI, F DUBAS, R BERNARD, P BIGOT, D CHAMAGNE, C ESPANET (2010) Consideration of Radial Magnetic Forces in Brushless DC Motors In: Proc. International Conference on Electrical Machines and Systems (ICEMS) 998-1003 Abstract: Notes:
	H C M MAI, F DUBAS, R BERNARD, P BIGOT, D CHAMAGNE, C ESPANET (2010) Optimal Design of a PMSM using Concentrated Winding for Small Hybrid Vehicle In: Proc. IEEE Véhicular Power and Propulsion (VPP) 01-06 Abstract: Notes:
	D LOUKAKOU, H GUALOUS, Y CHENG, F DUBAS, J M KAUFFMANN, C ESPANET (2010) Sizing and Experimental Characterization of Ultracapacitors for Small Urban Hybrid Electric Vehicle In: Proc. IEEE Véhicular Power and Propulsion (VPP) 01-07 Abstract: Notes:
	M L SOUGH, D DEPERNET, F DUBAS, B BOUALEM, C ESPANET (2010) PMSM and Inverter Sizing Compromise Applied to Flywheel for Railway Application In: Proc. IEEE Véhicular Power and Propulsion (VPP) 01-05 Abstract: Notes:
2009	F DUBAS, C ESPANET (2009) Semi-Analytical Solution of Cogging Torque in SMPMM In: Proc. COMPUMAG 01-02 Abstract: Notes:
	H C M MAI, F DUBAS, D CHAMAGNE, C ESPANET (2009) Optimal Design of a Surface Mounted Permanent Magnet In-Wheel Motor for an Urban Hybrid Vehicle In: Proc. IEEE Véhicular Power and Propulsion (VPP) 481-485 Abstract: Notes:
	A SARI, F DUBAS, C ESPANET (2009) Multi-Objective Design Optimization of PMSM for PEM Fuel Cell Air-Circuit with PSO Algorithms In: Proc. IEEE International Electric Machines and Drives Conference (IEMDC) 1637-1644 Abstract: Notes:

	F DUBAS, C ESPANET (2009) Semi-Analytical Solution of 2-D Rotor Eddy-Current Losses due to the Slotting Effect in SMPMM In: Proc. COMPUMAG 01-02 Abstract: Notes:
	Z WU, D DEPERNET, C KIEFFER, F DUBAS, D HISSEL, C ESPANET (2009) Electrical Motor Design for Hybrid Heavy-Duty Electrical Powertrain In: Proc. IEEE Véhicular Power and Propulsion (VPP) 486-493 Abstract: Notes:
	F DUBAS, A SARI, J M KAUFFMANN, C ESPANET (2009) Cogging Torque Evaluation through a Magnetic Field Analytical Computation in Permanent Magnet Motors In: Proc. International Conference on Electrical Machines and Systems (ICEMS) Accepted Paper Abstract: Notes:
	F DUBAS, C ESPANET (2009) Effet de Dentures dans les MSAPMS via une Nouvelle Modélisation Analytique de l'Induction Magnétique à Vide In: Proc. Electrotechnique du Futur (EF) 01-09 Abstract: Notes:
	Z WU, D DEPERNET, C KIEFFER, F DUBAS, D HISSEL, C ESPANET (2009) Modélisation d'une Chaîne de Traction pour Véhicule Hybride Electrique de Type Poids Lourd In: Proc. Electrotechnique du Futur (EF) 01-08 Abstract: Notes:
	H C M MAI, F CHARIH, F DUBAS, D CHAMAGNE, C ESPANET (2009) Comparaison de Deux Types de Bobinage d'une MSAP pour la Propulsion d'un Véhicule Hybride Urbain In: Proc. Electrotechnique du Futur (EF) 01-06 Abstract: Notes:
2008	F DUBAS, A SARI, D HISSEL, C ESPANET (2008) A Comparison between CG and PSO Algorithm for the Design of a PM Motor for Fuel Cell Ancillaries In: Proc. IEEE Véhicular Power and Propulsion (VPP) 01-07 Abstract: Notes:
2007	J POUGET, F DUBAS, B BOUALEM, C ESPANET (2007) Origines des Erreurs de Modélisation sur les Pertes Electromagnétiques dans les Machines Electriques In: CdRom Électrotechnique du Futur (EF) 01-08 Abstract: Notes:
2005	F DUBAS, C ESPANET, A MIRAOUI (2005) Design of a High-Speed Permanent Magnet Motor for the Drive of a Fuel Cell Air-Compressor In: Proc. IEEE Véhicular Power and Propulsion (VPP) 603-610 Abstract: Notes:
	F DUBAS, C ESPANET, A MIRAOUI (2005) Field Diffusion Equation in High-Speed Surface Mounted Permanent Magnet Motors, Parasitic Eddy-Current Losses In: CdRom ELECTROMOTION 01-06 Abstract: Notes:

	F DUBAS, S SRAIRI, H S ZIRE, C ESPANET, A MIRAOUI (2005) Étude de la Désaimantation dans l'Air d'un Inducteur Cylindrique de Machines à Aimants permanents montés en Surface In: CdRom Électrotechnique du Futur (EF) 01-06 Abstract: Notes:
2004	F DUBAS, C ESPANET, A MIRAOUI (2004) Maximization of No-Load Density in Surface Mounted Permanent Magnet Motor In: CdRom International Conference on Electrical Machines (ICEM) 430-436 Abstract: Notes:
	F DUBAS, C ESPANET, A MIRAOUI (2004) Analytical Modelling of No-Load Density in Surface Mounted Permanent Magnet Motor In: Proc. Aegean Conference on Electrical Machines and Power Electronics (ACEMP) 283-290 Abstract: Notes:
	F DUBAS, C ESPANET, A MIRAOUI (2004) Maximization of No-Load Density in Surface Mounted Permanent Magnet Motor In: Proc. IEEE Conference on Electromagnetic Field Computation (CEFC) 202 Abstract: Notes:
2003	F DUBAS, C ESPANET, A MIRAOUI (2003) Modélisation analytique et maximisation de l'induction magnétique à vide d'un moteur à aimants permanents montés en surface In: CdRom Électrotechnique du Futur (EF) 01-10 Abstract: Notes:
PhD theses

2006	F DUBAS (2006) Conception d'un moteur rapide à aimants permanents pour l'entraînement de compresseurs de piles à combustible Université de Franche-Comté (UFC) Abstract: Notes:
Prize Paper Award

2005	F DUBAS, C ESPANET, A MIRAOUI (2005) Design of a High-Speed Permanent Magnet Motor for the Drive of a Fuel Cell Air-Compressor [Prize Paper Award] Abstract: Notes: