Abstract: In this paper, QualiTree, a fruit tree model designed to study the management of fruit quality, and developed and described in a companion paper (Lescourret et al. in Trees Struct Funct, 2010), was combined with a simple light-interception sub-model, and then parameterised and tested on peach in different situations. Simulation outputs displayed fairly good agreement with the observed data concerning mean fruit and vegetative growth. The variability over time of fruit and vegetative growth was well predicted. QualiTree was able to reproduce the observed response of trees to heterogeneous thinning treatments in terms of fruit growth. A sensitivity analysis showed that the average seasonal growth rates of the different organs were sensitive to changes to the values of their respective initial relative growth rates and that stem wood was the tree organ the most affected by a change in the initial relative growth rates of other organs. QualiTree was able to react to simulated scenarios that combined thinning and pest attacks. As expected, thinning intensity and the percentage damage caused by pests significantly affected fruit yield and quality traits at harvest. These simulations showed that QualiTree could be a useful tool to design innovative horticultural practices.
Abstract: Soil is an essential resource for life and its properties are susceptible to be modified by tillage systems. The impact of management practices on soil functions can be assessed through a soil quality index. It is interesting to assess soil quality in different soil types. Therefore, the aim of this study was to determine the soil quality index of a Paleudult under different management conditions and sunflower culture. The experiment was carried out in Botucatu (SP, Brazil), in an 11-year non-tilled area used for growing soybean and maize during summer and black oat or triticale in winter. Four management systems were considered: no-tillage with a hoe planter (NTh), no-tillage with a double-disk planter (NTd), reduced tillage (RT) and conventional tillage (CT). Soil samples were taken from the planting lines at harvest time. To determine the soil quality indices, following the methodology proposed by , three main soil functions were assessed: soil capacity for root development, water storage capacity of the soil and nutrient supply capacity of the soil. The studied Paleudult was considered a soil with good quality under all the observed management systems. However, the soil quality indices varied between treatments being 0.64, 0.68, 0.86 and 0.79 under NTh, NTd, RT and CT, respectively. Physical attributes such as resistance to penetration and macroporosity increased the soil quality index in RT and CT compared to NTh and NTd. The soil quality indices obtained suggested that the evaluated soil is adequate for sunflower production under our study conditions. In view of the SQI values, RT is the most suitable management for this site since it preserves soil quality and provides an acceptable sunflower yield.
Abstract: Soil environmental factors affect the structure of arbuscular mycorrhizal (AM) fungal communities present in soil. However, it is not understood to which degree management practices such as tillage lead to dissimilarities between intra- and extraradical AM fungal communities. This study aims to assess the influence of two different soil management practices (conventional tillage and no-till) on the diversity of AMF communities, both in rhizosphere soil and inside corn roots. We hypothesized that under no-till, roots are colonized as they grow through the undisturbed fungal mycelia left from the previous crop whereas under conventional tillage they are colonized by those propagules that survived disturbance and can re-establish in their new relocated and mixed environment. We predicted that the degree of similarity of AM fungal communities inside versus outside the roots would be greater under no-till than under tillage. Using terminal restriction fragment length polymorphism (T-RFLP) and denaturing gradient gel electrophoresis we observed a different AM fungal community present in roots under no-till than under conventional tillage. Moreover, the communities present in the rhizosphere soil were different than in the roots of the corn plants. These results suggest that soil management does alter the diversity of AM fungal communities associated with corn roots and that plants influence the structure of the AMF community colonizing their roots. Sequencing results indicated that the majority of AMF species found in this agricultural soil was Glomus spp. However, further work is required to determine the extent to which AM fungal genotypic alterations by soil management influences competitive relationships.
Abstract: Cotton (Gossypium hirsutum L.r. latifolium Hutch) is very sensitive to soil conditions. The Iuiu Valley, located in the Southwest of Bahia State in Brazil, was an important area for cotton production but an inadequate soil management for years and consequent soil quality degradation lead to the decline of the crop in the region. In an effort to reestablish cotton, this study was carried out to identify a sustainable soil management system for cotton production in the region. The experiment was carried out in Palmas de Monte Alto (Bahia, Brazil) on an Eutrichrept soil, and consisted of eight treatments (two tillage systems and four cotton cultivars). The field lay-out was a split-plot with tillage systems as main plots and cultivars as subplots. The tillage systems consisted of conventional and reduced tillage and cotton cultivars used were 'BRS Aroeira', 'BRS 201', 'Delta Opal' and 'BRS Cedro'. No significant differences were observed between the two tillage systems for plant height, stem diameter, boll weight, yield, fiber percentage, and fiber length. Conventional tillage promoted higher fiber length and uniformity for BRS 201 as well as higher fiber resistance for the other three cultivars. On the other hand, reduced tillage promoted higher micronaire index values for Delta Opal. The BRS Cedro cultivar showed a greater plant height independently from the tillage system. In conclusion, reduced tillage allowed a sustainable soil management without compromising cotton yields and quality.
Abstract: The aim of this work was to analyze the spatial distribution of soil compaction and the influence of soil water content on the resistance to penetration. The latter variable was described by the cone index. The soil at the study site was a Nitisol and the cone index data were obtained using a penetrometer. Soil resistance was assessed at 5 different depths, i.e. 0-10 cm, 10-20 cm, 20-30 cm, 30-40 cm and deeper than 40 cm, whereas soil water content was measured at 0-20 cm and 20-40 cm. Soil water conditions varied during the different samplings. Coefficients of variation for cone index ranged from 16.5% to 45.8% while those for soil water content varied from 8.96% to 21.38%. Results suggested a high correlation between soil resistance, as assessed by the cone index, and soil depth. However, the expected relation with soil water content was not observed. Spatial dependence was observed in 31 out of 35 data series, both cone index and soil water content. This structure was fitted to exponential models with nugget effect varying from 0 to 90% of the sill value. Four of the data series showed a random behaviour. Inverse distance technique was used in order to map the distribution of the variables when no spatial structure was observed. Ordinary kriging showed a smoothing of the maps compared to those from inverse distance weighing. Indicator kriging was used to map the cone index spatial distribution for recommendation of further soil management.
Abstract: Nowadays, agricultural practices should combine high yields with a sustainable use of resources. Different tillage practices and crop covers, if combined, may help to achieve both objectives. In this work, several traits of a soybean (Glycine max L. Merr) cultivar were studied under different conditions of tillage and previous soil coverages. The experiment was installed at Lageado Research Station, Botucatu county, SP, Brazil, on a Paleudult. It consisted of nine treatments (combining three systems of soil tillage and three cover crops) and 4 replicates, yielding 36 plots of a randomized block experimental design. The soil tillage systems considered were: (1) conventional tillage with two heavy harrowing and a levelling harrowing; (2) chiseling, and (3) no-tillage with chemical drying of vegetation. The three cover crops used were: black oat, sorghum and spontaneous vegetation. Analyzed variables were: plant height, initial and final plant densities, height of first pod insertion, weight of a thousand grains, number of pods per plant, number of grains per pod, and crop yield. No significant differences were observed for most of the analyzed variables; however, conventional tillage produced significantly heavier grains and a higher number of pods per plant. The selected covers were considered an excellent coverage prior to planting soybean in a crop rotation. The three tillage systems can be used for deployment of culture without compromising the development of soybean.
Abstract: Knowledge of soil loss rates by water erosion under given climate, soil, topography, and management conditions is important for establishing soil conservation schemes. In Galicia, a region with Atlantic climatic conditions in Spain, field observations over the last decade indicate that interrill, rill and ephemeral gully erosion may be an important sediment source. The aim of this work was to assess concentrated erosion rates, describe types of rills and ephemeral gullies and determine their origin, evolution and importance as sediment sources. Soil surface state and concentrated flow erosion were surveyed on medium textured soils, developed over basic schists of the Ordenes Complex series (Coruña province, Spain) from 1997 to 2006. Soil surface state was characterized by crust development, tillage features and roughness degree. Soil erosion rate was directly measured in the field. Concentrated flow erosion took place mainly on seedbeds and recently tilled surfaces in late spring and by autumn or early winter. During the study period, erosion rates were highly variable and the following situations could be distinguished: (a) no incision or limited rill incision, i.e. below 2âMgâhaâ1 yearâ1; (b) generalized rill and ephemeral gully incision in the class of mean values between 2·5 and 6·25âMgâhaâ1 yearâ1, this was the most common erosion pattern; and (c) heavy erosion as observed during an extremely wet winter period, between October 2000 and February 2001, with erosion figures that may be about ten orders of magnitude higher, up to 55â60âMgâhaâ1 yearâ1. Therefore, low values of soil losses are dominant, but also large values of rill and ephemeral gully erosion occurred during the study period.
Abstract: Phosphorus (P) export in watershed runoff can accelerate the eutrophication of fresh waters. Intensification of crops and animal farming in many areas has created regional imbalances in P inputs and P outputs in farm practice. The aim of this study was to assess the temporal changes in concentration and losses of total P (TP), total sedimentary P (TSP), and total dissolved P (TDP) at the outlet of an agroforestry catchment 36.3 km2 in size located at northwestern Spain. The study data sets range from January 1999 to December 2005. Phosphorus load of surface water sampled at the catchment outlet was strongly affected by agricultural practices. Most particulate SP was exported during storm flow events. The TSP contents ranged up to 1063 µg/L, and TDP contents ranged up to 259 µg/L. However, in most of the study events particulate P was less than 300 µg/L and during base flow less than 50 µg/L. Total and particulate P showed a very close relationship, but there was no consistent relationship between water discharge and total P or dissolved P. A few events of intensive precipitation are responsible for the transport of suspended sediments and particles, mobilizing sediments from different source areas. The mean yearly TP export was 0.80 kg/ha and annual dissolved TDP export was approximately 0.30 kg/ha.
Abstract: Tillage practices may reduce the organic matter content in near-surface soil horizons causing crust formation. Surface conditions may cause an increase in surface run-off, thus enhancing contaminant transfer of heavy metals or an acceleration in nutrient loss. This study examines the effect of applying crop residues to the surface of tilled soils on heavy metal losses by run-off. Losses in iron (Fe), manganese (Mn), zinc (Zn) and copper (Cu) were analysed. Run-off and sediment yield were measured on 1 m2 plots using a rainfall simulator with a constant 65 mm/h intensity. Four successive rainfall applications were performed, the first three at 25 mm each and the last at 65 mm. Added corn straw varied between 0 and 4 t/ha in the five studied treatments. After 140 mm cumulative rainfall, total heavy metal losses were as follows: Fe from 137 to 950 mg/L, Mn from 2.3 to 12.83 mg/L, Cu from 0.09 to 0.72 mg/L and Zn from 0.31 to 2.46 mg/L. Dissolved fractions were as follows: Fe from 0.014 to 0.229 mg/L, Mn from 0.034 to 1.45 mg/L, Cu from 0.002 to 0.013 mg/L and Zn from 0.02 to 0.12 mg/L. Total concentrations of the studied elements decreased exponentially due to the effect of corn straw on soil loss. However, dissolved contents of Fe and Cu scarcely varied. Significant positive linear correlations were observed between total heavy metal content and soil and sediment loss by run-off. It is concluded that the addition of straw to a soil of low fertility prevents heavy metal loss.
Abstract: Degraded soil surface conditions favor surface runoff, thus enhancing sediment and nutrient losses. This study examined the effect of crop residues on carbon (C), nitrogen (N), total phosphorus (TP), and total dissolved P (TDP) losses by surface runoff in an agricultural loamy soil with degraded structure. Runoff and sediment yield were made over 1âm2 plots using a rainfall simulator with constant 65 mmhâ1 intensity. Four successive rainfall applications were performed, the first three ones 25 mm each and the last one 65 mm. Added corn straw varied between 0 and 4 thaâ1 in the five studied treatments. Organic C, N, and TP concentrations in runoff showed a trend to decrease because of the effect of corn straw on soil losses. However, TDP concentration increased with increasing crop residue in the lower two rainfall events. Sedimentary P constituted the major proportion of P in runoff. After 140 mm of cumulative rainfall, nutrient losses were as follows: organic C from 137.7 to 792.7 kghaâ1, N from 16.65 to 88.82 kghaâ1, TP from 1.72 to 7.87 kghaâ1, and TDP 57 to 87 ghaâ1. Total losses of the studied nutrients were correlated with soil losses.
Abstract: An important issue in pluviometric data analysis from rain gauges is the verification of their consistency. In general, this attribute is assessed using double-mass curves. This technique compares cumulative monthly rainfall from a gauge with that averaged from meteorological stations located nearby. The aim of this study was to analyze the quality of monthly rainfall data registered in Galicia (NW Spain) in a five year period (2002â2006). Initially, 159 meteorological stations were evaluated; however, 59 gauges were withdrawn because 10% of their data were missing. Double-mass analysis was performed following two procedures: a) data from each gauge were compared to those obtained in the nearby main station and b) data from each site were compared to the average from five nearby gauges, including data from neighboring regions. The second procedure proved to be more reliable. Rainfall data did not show any outlier for the study period. Determination coefficients were greater than 0.95 in all cases. A graphical analysis showed some deviations from the trend lines in certain stations. First, rainfall maps were obtained by inverse distances weighting. Furthermore, a comprehensive geostatistical analysis, centered in the characterization of the structure of rainfall spatial variability, was performed. Differences between two kriging methods, ordinary and kriging with an external drift, were confirmed, considering the later as a more appropriate technique for rainfall interpolation in the region.
Abstract: In this paper, results from three different interpolation techniques based on Geostatistics (ordinary kriging, kriging with external drift and conditional simulation) and one deterministic method (inverse distances) for mapping total monthly rainfall are compared. The study data set comprised total monthly rainfall from 1998 till 2001 corresponding to a maximum of 121 meteorological stations irregularly distributed in the region of Galicia (NW Spain). Furthermore, a raster Geographic Information System (GIS) was used for spatial interpolation with a 500Ã500 m grid digital elevation model. Inverse distance technique was appropriate for a rapid estimation of the rainfall at the studied scale. In order to apply geostatistical interpolation techniques, a spatial dependence analysis was performed; rainfall spatial dependence was observed in 33 out of 48 months analysed, the rest of the rainfall data sets presented a random behaviour. Different values of the semivariogram parameters caused the smoothing in the maps obtained by ordinary kriging. Kriging with external drift results were according to former studies which showed the influence of topography. Conditional simulation is considered to give more realistic results; however, this consideration must be confirmed with new data.
