Abstract:

Abstract: Chemical cytometry studies the molecular composition of individual cells by means of capillary electrophoresis or capillary chromatography. In one of its realizations an intact cell is injected inside the capillary, the plasma membrane is disrupted to release the cellular contents into the separation buffer, and, finally, the molecules of interest are separated and detected. The solubilization of the plasma membrane with a surfactant is a simple and efficient way of achieving cell lysis inside the capillary. To facilitate cell lysis by a surfactant the cell has to be contacted with the surfactant inside the capillary. We recently introduced a generic method for mixing solutions inside the capillary termed transverse diffusion of laminar flow profiles (TDLFP). In this work, we propose that TDLFP can facilitate efficient cell lysis inside the capillary. Conceptually, a short plug of the surfactant is injected by pressure prior to cell injection. The cell is then injected by pressure within a plug of the physiological buffer. Due to the parabolic profiles of pressure-driven laminar flows the interface between the plug of the surfactant and that of the physiological buffer is predominantly longitudinal. Transverse diffusion mixes the surfactant with the physiological buffer, which leads to surfactant's contact with the cell and subsequent cell lysis. Here, we demonstrate that the proposed concept is valid. TDLFP-facilitated cell lysis by a short plug of the surfactant allows us to exclude the surfactant from the run buffer, and, hence, facilitates modes of separation, which are incompatible with the surfactant's presence in the run buffer. In addition to cell lysis, TDLFP will be used to mix the cellular components with labeling reactants, affinity probes, inhibitors, etc. We foresee that the generic nature and enabling capabilities of TDLFP will speed up the maturation of chemical cytometry into a practical bioanalytical tool.

Abstract: Aptamers are typically selected from libraries of random DNA (or RNA) sequences by SELEX, which involves multiple rounds of alternating steps of partitioning and PCR amplification. Here we report, for the first time, non-SELEX selection of aptamers-a process that involves repetitive steps of partitioning with no amplification between them. A highly efficient affinity method, non-equilibrium capillary electrophoresis of equilibrium mixtures (NECEEM), was used for partitioning. We found that three steps of NECEEM-based partitioning in the non-SELEX approach were sufficient to improve the affinity of a DNA library to a target protein by more than 4 orders of magnitude. The resulting affinity was higher than that of the enriched library obtained in three rounds of NECEEM-based SELEX. Remarkably, NECEEM-based non-SELEX selection took only 1 h in contrast to several days or several weeks required for a typical SELEX procedure by conventional partitioning methods. In addition, NECEEM-based non-SELEX allowed us to accurately measure the abundance of aptamers in the library. Not only does this work introduce an extremely fast and economical method for aptamer selection, but it also suggests that aptamers may be much more abundant than they are thought to be. Finally, this work opens the opportunity for selection of drug candidates from libraries of small molecules, which cannot be PCR-amplified and thus are not approachable by SELEX.

Abstract: Protein-DNA interactions play a defining role in many cellular processes. Studying such interactions at the single-cell level is important and challenging. Here we make the first step toward achieving this goal with chemical cytometry. Chemical cytometry utilizes capillary separation for detailed chemical analyses of single cells. The cell is injected into a capillary, lysed, and its components are analyzed by CE or capillary chromatography with highly sensitive detection. In order to apply chemical cytometry to studies of protein-DNA interactions, cell lysis must not destroy protein-DNA complexes. Surfactants represent the most practical means of cell lysis inside the capillary. This work aimed at finding surfactants and lysis conditions that do not destroy protein-DNA complexes. We studied three groups of surfactants--ionic, zwitterionic, and nonionic--with respect to their ability to lyse the cell membrane without significantly influencing the stability of protein-DNA complexes. Nonequilibrium CE of equilibrium mixtures with surfactants in the equilibrium mixtures and in the run buffer was used to measure the equilibrium constant, K(d), and rate constant, k(off), of protein-DNA complex dissociation. We found that nonionic surfactants worked best: they lyse the plasma membrane without significantly influencing K(d), k(off), or the EOF. This work creates the foundation for studies of protein-DNA interactions in single cells by chemical cytometry.

Abstract: We coin the term "smart aptamers" -- aptamers with predefined binding parameters (k(on), k(off), Kd) of aptamer-target interaction. Aptamers, in general, are oligonucleotides, which are capable of binding target molecules with high affinity and selectivity. They are considered as potential therapeutic targets and also thought to rival antibodies in immunoassay-like analyses. Aptamers are selected from combinatorial libraries of oligonucleotides by affinity methods. Until now, technological limitations have precluded the development of smart aptamers. Here, we report on two kinetic capillary electrophoresis techniques applicable to the selection of smart aptamers. Equilibrium capillary electrophoresis of equilibrium mixtures was used to develop aptamers with predefined equilibrium dissociation constants (Kd), while nonequilibrium capillary electrophoresis of equilibrium mixtures facilitated selection of aptamers with different dissociation rate constants (k(off)). Selections were made for MutS protein, for which aptamers have never been previously developed. Both theoretical and practical aspects of smart aptamer development are presented, and the advantages of this new type of affinity probes are described.

Abstract: Synthetic photocontrolled proteins could be powerful tools for probing cellular chemistry. Several previous attempts to produce such systems by incorporating photoisomerizable chromophores into biomolecules have led to photocontrol but with incomplete reversibility, where the chromophore becomes trapped in one photoisomeric state. We report here the design of a modified GCN4-bZIP DNA-binding protein with an azobenzene chromophore introduced between Cys residues at positions 262 and 269 (S262C, N269C) within the zipper domain. As predicted, the trans form of the chromophore destabilizes the helical structure of the coiled-coil region of GCN4-bZIP, leading to diminished DNA binding relative to wild type. Trans-to-cis photoisomerization of the chromophore increases helical content and substantially enhances DNA binding. The system is observed to be readily reversible; thermal relaxation of the chromophore to the trans state and concomitant dissociation of the protein-DNA complex occurs with tau(1/2) approximately 10 min at 37 degrees C. It appears that conformational dynamics in the zipper domain make the transition state for isomerization readily available so that retention of reversible switching is observed.

Abstract: We present a method for direct determination of rate constants of complex formation, k(on), and dissociation, k(off). The method is termed plug-plug kinetic capillary electrophoresis (ppKCE). To explain the concept of the method, we consider the formation of a noncovalent complex C between molecules A and B; A is assumed to migrate slower in electrophoresis than B. In ppKCE, a short plug of A is injected into a capillary, followed by a short plug of B. When a high voltage is applied, the electrophoretic zone of B moves through that of A, allowing for the formation of C. When the zones of A and B are separated, C starts dissociating. The features of the resulting electropherogram are defined by both binding and dissociation. We developed a unique mathematical approach that allows finding k(on) and k(off) from a single electropherogram without nonlinear regression analysis. The approach uses algebraic functions with the only input parameters from electropherograms being areas and migration times of electrophoretic peaks. In this work, we explain theoretical bases of ppKCE and prove the principle of the method by finding k(on) and k(off) for a protein-ligand complex. The unique capability of the method to directly determine both k(on) and k(off) along with its simplicity make ppKCE highly attractive to a broad community of molecular scientists.

Abstract: Aptamers are typically selected from libraries of random DNA (or RNA) sequences through systematic evolution of ligands by exponential enrichment (SELEX), which involves several rounds of alternating steps of partitioning of candidate oligonucleotides and their PCR amplification. Here we describe a protocol for non-SELEX selection of aptamers--a process that involves repetitive steps of partitioning with no amplification between them. Non-equilibrium capillary electrophoresis of equilibrium mixtures (NECEEM), which is a highly efficient affinity method, is used for partitioning. NECEEM also facilitates monitoring of bulk affinity of enriched libraries at every step of partitioning and screening of individual clones for their affinity to the target. NECEEM allows all clones to be screened prior to sequencing, so that only clones with suitable binding parameters are sequenced. The entire protocol can be completed in 1 wk, whereas conventional SELEX protocols take several weeks even in a specialized industrial facility.

Abstract: We introduce temperature-controlled nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM) and demonstrate its use to study thermochemistry of protein-DNA interactions. Being a homogeneous kinetic method, temperature-controlled NECEEM uniquely allows finding temperature dependencies of equilibrium and kinetic parameters of complex formation without the immobilization of the interacting molecules on the surface of a solid substrate. In this work, we applied temperature-controlled NECEEM to study the thermochemistry of two protein-DNA pairs: (i) Taq DNA polymerase with its DNA aptamer and (ii) E. coli single-stranded DNA binding protein with a 20-base-long single-stranded DNA. We determined temperature dependencies of three parameters: the equilibrium binding constant (Kb), the rate constant of complex dissociation (k(off)), and the rate constant of complex formation (k(on)). The Kb(T) functions for both protein-DNA pairs had phase-transition-like points suggesting temperature-dependent conformational changes in structures of the interacting macromolecules. Temperature dependencies of k(on) and k(off) provided insights into how the conformational changes affected two opposite processes: binding and dissociation. Finally, thermodynamic parameters, DeltaH and DeltaS, for complex formation were found for different conformations. With its unique features and potential applicability to other macromolecular interactions, temperature-controlled NECEEM establishes a valuable addition to the arsenal of analytical methods used to study dynamic molecular complexes.

Abstract: BACKGROUND: Chemical cytometry is an emerging technology that analyzes chemical contents of single cells by means of capillary electrophoresis or capillary chromatography. It has a potential to become an indispensable tool in analyses of heterogeneous cell populations such as those in tumors. Ras oncogenes are found in 30% of human cancers. To become fully functional products, oncogenic Ras proteins require at least three posttranslational modifications: farnesylation, endoproteolysis, and carboxyl-methylation. Therefore, enzymes that catalyze the three reactions, farnesyltransferase (FTase), endoprotease (EPase), and methyltransferase (MTase), are considered highly attractive therapeutic targets. In this work, we used chemical cytometry to study the metabolism of a pentapeptide substrate that can mimic Ras proteins with respect to their posttranslational modifications in solution. METHODS: Mouse mammary gland tumor cells (4T1) and mouse embryo fibroblasts (NIH3T3) were incubated with a fluorescently labeled pentapeptide substrate, 2',7'-difluorofluorescein-5-carboxyl-Gly-Cys-Val-Ilu-Ala. Cells were washed from the substrate and resuspended in phosphate buffered saline. Uptake of the substrate by the cells was monitored by laser scanning confocal microscopy. Single cells were injected into the capillary, lysed, and subjected to capillary electrophoresis. Fluorescent metabolic products were detected by laser-induced fluorescence and compared with products obtained by the conversion of the substrate by FTase, EPase, and MTase in solution. Co-sampling of single cells with the in-vitro products was used for such comparison. RESULTS: Confocal microscopy data showed that the substrate permeated the plasma membrane and clustered in the cytoplasm. Further capillary electrophoresis and chemical cytometry analyses showed that the substrate was converted into three fluorescently labeled products, two of which were secreted in the culture medium and one remained in the cells. The intracellular product was present at approximately 100,000 molecules per cell. The three metabolic products of the substrate were found to be different from the products of its processing by FTase, EPase, and MTase in solution. CONCLUSIONS: This is the first report of chemical cytometry in the context of Ras-signaling studies. The chemical cytometry method used in this work will find applications in the development of suitable peptide substrates for monitoring enzyme activities in single cells.

Abstract: Aptamers are DNA (or RNA) ligands selected from large libraries of random DNA sequences and capable of binding different classes of targets with high affinity and selectivity. Both the chances for the aptamer to be selected and the quality of the selected aptamer are largely dependent on the method of selection. Here we introduce selection of aptamers by nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM). The new method has a number of advantages over conventional approaches. First, NECEEM-based selection has exceptionally high efficiency, which allows aptamer development with fewer rounds of selection. Second, NECEEM can be equally used for selecting aptamers and finding their binding parameters. Finally, due to its comprehensive kinetic capabilities, the new method can potentially facilitate selection of aptamers with predefined K(d), k(off), and k(on) of the aptamer-target interaction. In this proof-of-principle work, we describe the theoretical bases of the method and demonstrate its application to a one-step selection of DNA aptamers with nanomolar affinity for protein farnesyltransferase.

Abstract: We coin a term of "smart aptamers", which describes aptamers with predefined binding parameters of their interaction with the target. Here, we introduce a method for selection of smart aptamers with predefined values of Kd: equilibrium capillary electrophoresis of equilibrium mixtures (ECEEM). Conceptually, a mixture of a target with a DNA (RNA) library is prepared and equilibrated. A plug of the equilibrium mixture is injected into a capillary prefilled with a run buffer containing the target at the concentration identical to the target concentration in the equilibrium mixture. The components of the equilibrium mixture are separated by capillary electrophoresis while equilibrium is maintained between the target and aptamers. The unique feature of ECEEM is that aptamers with different Kd values migrate with different and predictable mobilities. Thus, collecting fractions with different mobilities results in smart aptamers with different and predefined Kd values. In this proof-of-principle work, we used ECEEM to select smart aptamers for MutS protein, for which aptamers have never been previously selected. Three rounds of ECEEM-based selection were sufficient to obtain smart aptamers with Kd values approaching theoretically predicted ones. ECEEM is the first method for aptamer selection whose ability to generate smart aptamers has been experimentally proven.

Abstract: We propose kinetic capillary electrophoresis (KCE) as a conceptual platform for the development of kinetic homogeneous affinity methods. KCE is defined as the CE separation of species that interact during electrophoresis. Depending on how the interaction is arranged, different KCE methods can be designed. All KCE methods are described by the same mathematics: the same system of partial differential equations with only initial and boundary conditions being different. Every qualitatively unique set of initial and boundary conditions defines a unique KCE method. Here, we (i) present the theoretical bases of KCE, (ii) define four new KCE methods, and (iii) propose a multimethod KCE toolbox as an integrated kinetic technique. Using the KCE toolbox, we were able to, for the first time, observe high-affinity (specific) and low-affinity (nonspecific) interactions within the same protein-ligand pair. The concept of KCE allows for the creation of an expanding toolset of powerful kinetic homogeneous affinity methods, which will find their applications in studies of biomolecular interactions, quantitative analyses, and selecting affinity probes and drug candidates from complex mixtures.

Abstract: We introduce sweeping capillary electrophoresis (SweepCE), a non-stopped-flow method for directly measuring the bimolecular rate constant of complex formation, and demonstrate its use for studying protein-DNA interaction. The capillary is prefilled with a solution of DNA, and electrophoresis is then carried out from a solution of the protein in a continuous mode. Because the electrophoretic mobility of the protein is greater than that of DNA, the protein continuously mixes with DNA and forms the protein-DNA complex. The complex migrates with a velocity higher than that of DNA and causes sweeping of DNA, which gave the name to the method. The bimolecular rate constant, kon, of complex formation can be determined from the time profile of DNA concentration using a simple mathematical model of the sweeping process. In this proof-of-principle work, we used SweepCE to directly measure kon = (3.4 +/- 0.6) x 106 M-1 s-1 for the interaction between single-stranded DNA-binding protein and a 15-mer DNA oligonucleotide. Along with nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM), SweepCE establishes a universal and comprehensive platform for studying kinetic and equilibrium parameters of complex formation between biopolymers.

Abstract: Until now, all methods for temperature sensing in capillary electrophoresis (CE) relied on molecular probes with temperature-dependent spectral/optical properties. Here we introduce a nonspectroscopic approach to determining temperature in CE. It is based on measuring a temperature-dependent rate constant of complex dissociation by means of a kinetic CE method known as nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM). Conceptually, a calibration curve of "the rate constant versus temperature" is built using NECEEM and a CE instrument with a reliable temperature control or, alternatively, a nonelectrophoretic method, such as surface plasmon resonance. The calibration curve is then used to find the temperature during CE in the same buffer but with another CE apparatus or under otherwise different conditions (cooling efficiency, length and diameter of the capillary, electrical field, etc.). In this proof-of-principle work, we used the dissociation of a protein-DNA complex to demonstrate that the NECEEM-based temperature determination method allows for temperature determination in CE with a precision of 2 degrees C. Then, we applied the NECEEM-based temperature determination method to study heat dissipation efficiency in CE instruments with active and passive cooling of the capillary. The nonspectroscopic nature of the method makes it potentially applicable to nonspectroscopic detection schemes, e.g. electrochemical detection. A "kinetic probe" can be coloaded into the capillary along with a sample for in situ temperature measurements. Higher order chemical reactions can also be used for temperature sensing, provided a kinetic CE method for measuring a corresponding rate constant is available.

Abstract: We propose a new method that allows the use of low-affinity aptamers as affinity probes in quantitative analyses of proteins. The method is based on nonequilibrium capillary electrophoresis of the equilibrium mixture (NECEEM) of a protein with its fluorescently labeled aptamer. In general, NECEEM of a protein with a fluorescently labeled aptamer generates an electropherogram with three characteristic features: two peaks and an exponential curve. Two peaks correspond to (i) the equilibrium amount of free aptamer in the equilibrium mixture and (ii) the amount of the protein-aptamer complex that remains intact at the time of detection. The exponential part is ascribed to the complex decaying during separation under nonequilibrium conditions. Simple analysis of the three features in experiments with known concentrations of the protein can be used for the determination of the equilibrium dissociation constant, Kd, of the aptamer-protein complex. Similar analysis of the three features in the experiment with unknown concentration of the protein and known Kd value allows the determination of the protein concentration. In this proof-of-principle work, the NECEEM method was applied to the analysis of thrombin using a fluorescein-labeled aptamer under the conditions at which the protein-aptamer complex completely decayed during the separation. We demonstrated that, despite the decay, as few as 4 x 10(6) molecules of the protein could be detected with NECEEM without sacrificing the accuracy. This sensitivity is comparable with that reported by others for the aptamer-based equilibrium method. Thus, the proposed NECEEM-based method allows the use of aptamers for highly sensitive affinity analysis of proteins even when protein-aptamer complexes are unstable.

Abstract: We describe a new electrophoretic method (patent pending), Non-Equilibrium Capillary Electrophoresis of Equilibrium Mixtures (NECEEM), and demonstrate its application to the study of protein-DNA interactions. A single NECEEM experiment allows for the determination of equilibrium and kinetic parameters of protein-DNA complex formation. The equilibrium mixture is prepared by mixing protein and DNA; it contains three components: free protein, free DNA, and the protein-DNA complex. A small plug of such a mixture is injected onto a capillary and the three components are separated under non-equilibrium conditions using a run buffer that does not contain the components of the equilibrium mixture. The protein-DNA complex decays during the NECEEM separation; the resulting electropherograms contain characteristic peaks and exponential curves. A simple analysis of a single electropherogram reveals two parameters: the equilibrium dissociation constant of the protein-DNA complex and the monomolecular rate constant of complex decay. The bimolecular rate constant of complex formation can then be calculated as the ratio of the two experimentally-determined constants. NECEEM was applied to find the equilibrium and kinetic parameters of interaction between an E. coli single-stranded DNA binding protein and a fluorescently-labeled oligonucleotide. The constants determined by NECEEM are in good agreement with those obtained by other methods. The new method is simple, fast, and accurate. It can be equally applied to other non-covalent molecular complexes.

Abstract: We propose that DNA-binding proteins can be used as highly efficient and versatile tools in analyses of DNA, RNA, and proteins. This work reports assays applying specific affinity probes: hybridization probes for analyses of DNA and RNA, and aptamer probes for analyses of proteins. Both types of probes are single-stranded DNA. In affinity analyses, in general, the probe (P) binds to a target molecule (T), and the amounts of the probe-target complex (P.T) and unbound P are determined. Distinguishing between P and P.T can be achieved by electrophoretic separation. If the electrophoretic mobilities of P and P.T are close in gel-free media, which is always the case for hybridization analyses, separation typically requires the use of a sieving matrix. Here we utilized a single-stranded DNA binding protein (SSB) to facilitate highly efficient gel-free separation of P and P.T in capillary electrophoresis (CE) for three types of targets: DNA, RNA, and proteins. When present in the CE run buffer, SSB binds differently to P and P.T. Due to this selective binding, SSB induces difference in electrophoretic mobilities of P and P.T in an SSB concentration-dependent fashion. The difference in the electrophoretic mobilities allows for affinity analyses of DNA, RNA, and proteins in gel-free CE. The large number of well-characterized DNA- and RNA-binding proteins and the diversity of their properties will allow researchers to design a comprehensive tool set for quantitative analyses of DNA, RNA, and proteins. Such analyses will facilitate identification of genomic DNA in ultra-small samples without error-prone and time-consuming PCR. They can also be used for monitoring gene expression at both mRNA and protein levels.

Abstract: Enzymatic farnesylation of oncogenic forms of Ras proteins is the initial step in a series of posttranslational modifications essential for Ras activity. The modification is catalyzed by the enzyme, protein farnesyltransferase (PFTase), which transfers a farnesyl moiety from farnesyl diphosphate to the protein. We employed capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection to develop a rapid and sensitive method for the determination of PFTase activity in vitro. The limited substrate specificity of PFTase allowed us to use a fluorescently labeled pentapeptide instead of a Ras protein as a substrate for the enzyme; the product of the enzymatic reaction was the farnesylated pentapeptide. The product was separated from the substrate by CE and quantified with LIF detection. Under optimal conditions, the separation was achieved within 10 min with a resolution of 86. The mass and concentration limits of detection for the farnesylated product were 10(-19) mol and 0.28 nM, respectively. By measuring the rate of accumulation of the farnesylated product, we were able to determine the kinetic parameters of the enzymatic reaction. For yeast PFTase as an enzyme and difluorocarboxyfluorescein-labeled GCVIA peptide as a substrate, the values of k(cat) and K(M) were found to be (3.1 +/- 0.3)x10(-3) s(-1) and (12.0 +/- 1.2) nuM, respectively. Our results suggest that CE-LIF can be efficiently used for the determination of enzymatic activity of PFTase in vitro. After minor modifications, the developed method can be also applied to other reactions of enzymatic prenylation of proteins.

Abstract: We introduce a novel electrophoretic method, nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM), and demonstrate its use for studying protein-DNA interactions. The equilibrium mixture of protein and DNA contains three components: free protein, free DNA, and the protein-DNA complex. A short plug of such a mixture is injected into the capillary, and the three components are separated under nonequilibrium conditions. The resulting electropherograms are composed of characteristic peaks and exponential curves. An easy nonnumerical analysis of a single electropherogram reveals two parameters: the equilibrium binding constant and the monomolecular rate constant of complex decay. The bimolecular rate constant of complex formation can then be calculated as the product of the two experimentally determined constants. NECEEM was applied to study the interaction between single-stranded DNA binding protein and a fluorescently labeled 15-mer oligonucleotide. It allowed us to measure for the first time the rate constant of complex decay for this important protein-DNA pair, k-1 = 0.03 s-1. The value of the equilibrium binding constant, Kb = 3.6 x 10-6 M-1, was in good agreement with those measured by other methods. As low as 10-18 mol of the protein was sufficient for the measurements. Thus, the new method is simple, informative, and highly sensitive. Moreover, it can be equally applied to other noncovalent protein-ligand complexes. These features of NECEEM make this method an indispensable tool in studies of macromolecular interactions. They also emphasize the potential role of NECEEM in the development of extremely sensitive protein assays using nucleotide aptamers.

Abstract: Intracomplex photochemical interaction of photoactive derivatives R-CONH(CH2)3NH-pGATACCAA, where R= p-azidotetrafluorophenyl (I) or 2-nitro-5-azidophenyl (II), and 5'-phospho-p-azidoanilide pGATACCAA (III) with a target - oligonucleotide *pGGTATCp (IV) and its derivatives *pGGTATCp-NH(CH2)3NHX, where X = H (V), Phe (VI), or Lys (VII), was studied. According to electrophoretic data, photoreagent (I) gives rise to a covalent photoadduct with compound (IV) as well as with derivatives (VI) and (VII). In the case of reagent (II), only targets (V) - (VII) including aliphatic amino groups participate in the photocoupling. Upon irradiation of the duplexes comprising photoreagent (III) and targets (V)-(VII), the process is accompanied by the cleavage of the reagent's oligonucleotide moiety off the photomodification product. A plausible mechanism of the cleavage is discussed.

Abstract: Photomodification of ribo- and deoxyribo-octanucleotides by oligonucleotide reagents (6- and 7-mers) bearing p-azidotetrafluorobenzamido and 2-nitro-5-azidobenzamido groups has been investigated. It is shown that the oligonucleotides with a perfluoroarylazide group were effective modifiers both of deoxyribo- and ribo-targets. Maximum extent of cross-linked product formation (70%) was obtained when the deoxyribo-octanucleotide was modified by a heptanucleotide reagent with a perfluoroarylazide group. Selectivity of the photomodification was also high (50% on the G-residue at a certain position).