Abstract: Langmuir-Blodgett (LB) films of N,N'-dioctadecyl thiacyanine perchlorate (TC18) and octadecyl rhodamine B chloride (RhB18) and their mixtures in the presence and absence of clay mineral layers were investigated by recording surface pressure-area (pi-A) isotherms and by UV-vis and fluorescence spectroscopies. The pi-A isotherms of TC18, RhB18, and their mixtures are characteristic of liquid expanded state behavior with repulsive interactions between the two cationic dyes. In the presence of laponite, the pi-A isotherms show liquid expanded and condensed-state behavior. In laponite dispersions and in monolayers, TC18 has a strong tendency to aggregate with formation of H- and J- aggregates. The absorption and fluorescence maxima of the monomers in the films are at 435 nm and at 480 nm; H-dimers have an absorption maximum around 410 nm and do not fluoresce. J-dimers are present in all the films with absorption maximum at 461 nm and fluorescence at 463 nm. RhB18 is mainly present as monomers in the LB films with an absorption maximum at 576 nm and fluorescence at 595 nm. Fluorescence resonance energy transfer from TC18 to RhB18 has been observed in clay dispersions and in films with and without laponite. The optimum condition for TC18 --> RhB18 fluorescence energy transfer in the films is 90 mol % TC18 + 10 mol % RhB18.
Abstract: Langmuir-Blodgett (LB) films of N,N'-dioctadecyl thiacyanine perchlorate (TC18) and octadecyl rhodamine B chloride (RhB18) and their mixtures in the presence and absence of clay mineral layers were investigated by recording surface pressure-area (pi-A) isotherms and by UV-vis and fluorescence spectroscopies. The pi-A isotherms of TC18, RhB18, and their mixtures are characteristic of liquid expanded state behavior with repulsive interactions between the two cationic dyes. In the presence of laponite, the pi-A isotherms show liquid expanded and condensed-state behavior. In laponite dispersions and in monolayers, TC18 has a strong tendency to aggregate with formation of H- and J- aggregates. The absorption and fluorescence maxima of the monomers in the films are at 435 nm and at 480 nm; H-dimers have an absorption maximum around 410 nm and do not fluoresce. J-dimers are present in all the films with absorption maximum at 461 nm and fluorescence at 463 nm. RhB18 is mainly present as monomers in the LB films with an absorption maximum at 576 nm and fluorescence at 595 nm. Fluorescence resonance energy transfer from TC18 to RhB18 has been observed in clay dispersions and in films with and without laponite. The optimum condition for TC18 --> RhB18 fluorescence energy transfer in the films is 90 mol % TC18 + 10 mol % RhB18.
Abstract: In this paper we report the effect of the incorporation of nano-dimensional clay platelets, laponite, on the J-aggregation of a thiacyanine dye N,N'-dioctadecyl thiacyanine perchlorate (NK) assembled into Langmuir-Blodgett (LB) monolayers. pi-A isotherms and atomic force microscopic studies confirm the successful incorporation of clay platelets into the Langmuir monolayer of NK. J-aggregates of NK remain present in LB films lifted at lower as well as higher surface pressures in the absence of laponite clay platelets. However, with the incorporation of clay platelets, J-aggregates are formed only in LB films lifted at higher surface pressure of 30 mN/m and totally absent in the films lifted at lower surface pressures of 10 and 15 mN/m. This may be due to the formation of nano-trapping level by overlapping of clay platelets at higher surface pressure. NK molecules may get squeezed to these nano-trapping to form J-aggregates.
Abstract: In this paper we report the effect of the incorporation of nano-dimensional clay platelets, laponite, on the J-aggregation of a thiacyanine dye N,N'-dioctadecyl thiacyanine perchlorate (NK) assembled into Langmuir-Blodgett (LB) monolayers. pi-A isotherms and atomic force microscopic studies confirm the successful incorporation of clay platelets into the Langmuir monolayer of NK. J-aggregates of NK remain present in LB films lifted at lower as well as higher surface pressures in the absence of laponite clay platelets. However, with the incorporation of clay platelets, J-aggregates are formed only in LB films lifted at higher surface pressure of 30 mN/m and totally absent in the films lifted at lower surface pressures of 10 and 15 mN/m. This may be due to the formation of nano-trapping level by overlapping of clay platelets at higher surface pressure. NK molecules may get squeezed to these nano-trapping to form J-aggregates.
Abstract: In this communication we investigate two dyes N,N'-dioctadecyl thiacyanine perchlorate (NK) and octadecyl rhodamine B chloride (RhB) in Langmuir and Langmuir-Blodgett (LB) films with or with out a synthetic clay laponite. Observed changes in isotherms of RhB in absence and presence of nano-clay platelets indicate the incorporation of clay platelets onto RhB-clay hybrid films. AFM images confirm the incorporation of clay into hybrid films. FRET is observed in clay dispersion and LB films with and without clay. Efficiency of energy transfer is maximum in LB films with clay.
Abstract: In this communication we investigate two dyes N,N'-dioctadecyl thiacyanine perchlorate (NK) and octadecyl rhodamine B chloride (RhB) in Langmuir and Langmuir-Blodgett (LB) films with or with out a synthetic clay laponite. Observed changes in isotherms of RhB in absence and presence of nano-clay platelets indicate the incorporation of clay platelets onto RhB-clay hybrid films. AFM images confirm the incorporation of clay into hybrid films. FRET is observed in clay dispersion and LB films with and without clay. Efficiency of energy transfer is maximum in LB films with clay.
Abstract: Layer-by-Layer self assembled films of rose bengal (RB) have been fabricated onto quartz substrate by the alternative adsorption of poly cation poly (allyl amine hydrochloride) (PAH) and RB. UV-Vis absorption studies reveal the formation of RB dimmer in PAH-RB LbL films. SEM picture confirms the aggregation of RB molecules in LbL films. Almost 15 minute is required to complete the interaction between RB and PAH molecules in the one bilayer LbL film. The dye (RB) was found to come off the film during the subsequent poly cation (PAH) deposition. As an alternative approach RB was anchored to the poly cation PAH via physiadsorption and controlling the concentration of the combination of RB and PAH was used as poly cation and poly (acrylic acid) (PAA) as poly anion for film deposition. The absorption spectra after each deposition showed that there was no material loss during layer depositions via second method.
Abstract: Molecular aggregation and monolayer characteristics of non-amphiphilic p-terphenyl (TP) mixed with either polymethyl methacrylate (PMMA) or stearic acid (SA) at the air-water interface were investigated. The miscibility of the two components was evaluated by measuring and analyzing surface pressure versus area per molecule ( pi-A) isotherm. Both attractive and repulsive interactions between the sample (TP) and the matrix (PMMA or SA) were observed depending on the composition and microenvironment. TP and PMMA/SA were not completely miscible in the mixed monolayer. Aggregation and phase separation between sample TP and matrix molecule was revealed by UV-Vis absorption spectroscopic studies and confirmed by scanning electron micrograpgh of LB films.
Abstract: Langmuir and Langmuir–Blodgett (LB) films of non-amphiphilic 2-(4-Biphenylyl)-5-phenyl-1,3,4-oxadiazole (abbreviated as PBD) mixed with stearic acid (SA) as well as with the inert polymer matrix poly(methyl methacrylate) (PMMA) have been studied. Surface pressure versus area per molecule (π–A) isotherm studies suggest that PBD molecules very likely stand vertically on the air–water interface and this arrangement allows the PBD molecules to form stacks and remain sandwiched between SA/PMMA molecules. At lower surface pressure, phase separation between PBD and matrix molecules occurs due to repulsive interaction. However, at higher surface pressure, PBD molecules form aggregates. The UV–vis absorption and steady-state fluorescence spectroscopic studies of the mixed LB films of PBD reveal the nature of the aggregates. H-type aggregate predominates in the mixed LB films, whereas I-type aggregate predominates in the PBD-PMMA spin-coated films. The degree of deformation produced in the electronic levels are largely affected by the film thickness and the surface pressure of lifting.
Abstract: This communication reports the formation and characterization of self-assembled films of a low molecular weight anionic dye amaranth and polycation poly(allylamine hydrochloride) (PAH) by electrostatic alternating layer-by-layer (LBL) adsorption. It was observed that there was almost no material loss occurred during adsorption process. The UV–vis absorption and fluorescence spectra of amaranth solution reveal that with the increase in amaranth concentration in solution, the aggregated species starts to dominate over the monomeric species. New aggregated band at 600 nm was observed in amaranth–PAH mixture solution absorption spectrum. A new broad low intense band at the longer wavelength region, in the amaranth–PAH mixture solution fluorescence spectrum was observed due to the closer association of amaranth molecule while tagged into the polymer backbone of PAH and consequent formation of aggregates. The broad band system in the 650–750 nm region in the fluorescence spectra of different layered LBL films changes in intensity distribution among various bands within itself, with changing layer number and at 10 bilayer LBL films the longer wavelength band at 710 nm becomes prominent. Existence of dimeric or higher order n-meric species in the LBL films was confirmed by excitation spectroscopic studies. Almost 45 min was required to complete the interaction between amaranth and PAH molecules in the one-bilayer LBL film
Abstract: This communication reports the formation and characterization of self-assembled films of a low molecular weight anionic dye amaranth and polycation poly(allylamine hydrochloride) (PAH) by electrostatic alternating layer-by-layer (LBL) adsorption. It was observed that there was almost no material loss occurred during adsorption process. The UV-vis absorption and fluorescence spectra of amaranth solution reveal that with the increase in amaranth concentration in solution, the aggregated species starts to dominate over the monomeric species. New aggregated band at 600 nm was observed in amaranth-PAH mixture solution absorption spectrum. A new broad low intense band at the longer wavelength region, in the amaranth-PAH mixture solution fluorescence spectrum was observed due to the closer association of amaranth molecule while tagged into the polymer backbone of PAH and consequent formation of aggregates. The broad band system in the 650-750 nm region in the fluorescence spectra of different layered LBL films changes in intensity distribution among various bands within itself, with changing layer number and at 10 bilayer LBL films the longer wavelength band at 710 nm becomes prominent. Existence of dimeric or higher order n-meric species in the LBL films was confirmed by excitation spectroscopic studies. Almost 45 min was required to complete the interaction between amaranth and PAH molecules in the one-bilayer LBL film.
Abstract: In the present communication we report the monolayer characteristics of pyrene mixed with stearic acid (SA) at the air-water interface. The monolayer properties are investigated by recording and analyzing the surface pressure-area per molecule isotherm (pi-A ) of the pyrene-SA mixed films. It is observed that the pyrene and SA are miscible in the mixed monolayer. This miscibility/nonideality leads to phase separation between the constituent components (pyrene and SA). BAM image of the mixed monolayer confirms the miscibility or nonideal mixing at the mixed monolayer.
Abstract: Langmuir-Blodgett (LB) films at different mole fractions of p-terphenyl have been prepared using two different matrices, viz., stearic acid (SA) and polymethyl methacrylate (PMMA). Multilayered LB films have been formed by changing various LB parameters namely, mole fraction of mixing, changing the number of layers as well as also the different surface pressure of lifting. The spectroscopic characteristics of mixed LB films, solution and microcrystal have been compared using UV-vis absorption and steady state fluorescence spectroscopy. Change of planarity of TP molecules are occurred while going from solution to solid states/films. Fluorescence spectra of the mixed LB films reveal intense excimeric emission in the mixed LB films with D1 excimer peak at 397 nm and D2 excimer peak at 412 nm. Various LB parameters namely changing the number of layers as well as the different surface pressure of lifting played important roles in the formation of dual excimeric sites in the mixed LB films.
Abstract: This communication reports the formation of complex Langmuir monolayer at the air-water interface by charge transfer types of interaction with the water soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules doped with rosebengal (RB), with the stearic acid (SA) molecules of a preformed SA Langmuir monolayer. The reaction kinetics of the formation of RB-CTAB-SA complex monolayer was monitored by observing the increase in surface pressure with time while the barrier was kept fixed. Completion of interaction kinetics was confirmed by FTIR study. This complex Langmuir films at the air-water interface was transferred onto solid substrates at a desired surface pressure to form multilayered Langmuir-Blodgett films. Spectroscopic characterizations reveal some molecular level interactions as well as formation of microcrystalline aggregates depending upon the molar ratios of CTAB and RB within the complex LB films. Presence of two types of species in the complex LB films was confirmed by fluorescence spectroscopy.
Abstract: This communication reports the formation of complex Langmuir monolayer at the air-water interface by charge transfer types of interaction with the water soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules doped with rosebengal (RB), with the stearic acid (SA) molecules of a preformed SA Langmuir monolayer. The reaction kinetics of the formation of RB-CTAB-SA complex monolayer was monitored by observing the increase in surface pressure with time while the barrier was kept fixed. Completion of interaction kinetics was confirmed by FTIR study. This complex Langmuir films at the air-water interface was transferred onto solid substrates at a desired surface pressure to form multilayered Langmuir-Blodgett films. Spectroscopic characterizations reveal some molecular level interactions as well as formation of microcrystalline aggregates depending upon the molar ratios of CTAB and RB within the complex LB films. Presence of two types of species in the complex LB films was confirmed by fluorescence spectroscopy.
Abstract: Langmuir-Blodgett (LB) films at different mole fractions of p-terphenyl have been prepared using two different matrices, viz., stearic acid (SA) and polymethyl methacrylate (PMMA). Multilayered LB films have been formed by changing various LB parameters namely, mole fraction of mixing, changing the number of layers as well as also the different surface pressure of lifting. The spectroscopic characteristics of mixed LB films, solution and microcrystal have been compared using UV-vis absorption and steady state fluorescence spectroscopy. Change of planarity of TP molecules are occurred while going from solution to solid states/films. Fluorescence spectra of the mixed LB films reveal intense excimeric emission in the mixed LB films with D1 excimer peak at 397 nm and D2 excimer peak at 412 nm. Various LB parameters namely changing the number of layers as well as the different surface pressure of lifting played important roles in the formation of dual excimeric sites in the mixed LB films.
Abstract: We report the miscibility and molecular orientation of carbazole (CA) molecules in the mixed Langmuir and Langmuir–Blodgett (LB) films of CA in polymethyl methacrylate (PMMA) and stearic acid (SA) matrices. The π-A isotherm confirms the formation of stable Langmuir films of CA mixed with either PMMA or SA at air–water interface. Characteristics of area per molecule versus molefraction and collapse pressure versus molefraction reveal complete demixing of CA and the matrix PMMA/SA molecules in the mixed films. Absorption spectroscopy certainly confirms the fact that CA molecules have preferred orientation on the substrate of the LB films.
Abstract: This Letter reports the immobilization of DNA onto a solid support by electrostatic interaction with a polycation poly(allylamine hydrochloride) (PAH). The films were analyzed by UV–vis spectroscopy. The significant observation is that single stranded DNA gets immobilized on the PAH backbone of Layer-by-Layer (LbL) films when the films are fabricated above the melting temperature of DNA. Singly stranded DNA immobilized in the LbL films is not restored into double stranded DNA at room temperature
Abstract: We report the miscibility characteristics of two components in a binary mixture of 9-phenyl anthracene (PA) mixed with stearic acid (SA) or polymethyl methacrylate (PMMA). The behaviour of surface pressure versus area per molecule isotherms reveal that the area per molecule decreases systematically with increasing molefractions of PA. The characteristics of areas per molecule versus molefractions and collapse pressure vs molefraction indicate that various interactions involved among the sample and matrix molecules. The interaction scheme is found to change with the change in surface pressure and molefraction of mixing. Scanning electron microscopic study confirms the aggregation of PA molecules in the mixed films
Abstract: Abstract
Langmuir–Blodgett (LB) films at different mole fractions of p-terphenyl have been prepared using two different matrices, viz., stearic acid (SA) and polymethyl methacrylate (PMMA). Multilayered LB films have been formed by changing various LB parameters namely, mole fraction of mixing, changing the number of layers as well as also the different surface pressure of lifting. The spectroscopic characteristics of mixed LB films, solution and microcrystal have been compared using UV–vis absorption and steady state fluorescence spectroscopy. Change of planarity of TP molecules are occurred while going from solution to solid states/films. Fluorescence spectra of the mixed LB films reveal intense excimeric emission in the mixed LB films with D1 excimer peak at 397 nm and D2 excimer peak at 412 nm. Various LB parameters namely changing the number of layers as well as the different surface pressure of lifting played important roles in the formation of dual excimeric sites in the mixed LB films.
Abstract: This communication reports the formation of complex Langmuir monolayer at the air–water interface by charge transfer types of interaction with the water soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules doped with rosebengal (RB), with the stearic acid (SA) molecules of a preformed SA Langmuir monolayer. The reaction kinetics of the formation of RB-CTAB-SA complex monolayer was monitored by observing the increase in surface pressure with time while the barrier was kept fixed. Completion of interaction kinetics was confirmed by FTIR study. This complex Langmuir films at the air–water interface was transferred onto solid substrates at a desired surface pressure to form multilayered Langmuir–Blodgett films. Spectroscopic characterizations reveal some molecular level interactions as well as formation of microcrystalline aggregates depending upon the molar ratios of CTAB and RB within the complex LB films. Presence of two types of species in the complex LB films was confirmed by fluorescence spectroscopy.
Abstract: This communication reports the formation of complex Langmuir monolayer at the air-water interface with the water-soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules when interacted with the stearic acid (SA) molecules. The reaction kinetics of the formation of the CTAB-SA complex was monitored by observing the surface pressure versus time graph. Multilayered LB films of this complex doped with Congo red was successfully formed onto a quartz substrate. UV-Vis absorption and steady-state fluorescence spectroscopic characteristics of this doped LB films confirms the successful incorporation of Congo red molecules in to the CTAB-SA complex films.
Abstract: This paper reports the pi-A isotherms and spectroscopic characteristics of mixed Langmuir and Langmuir-Blodgett (LB) films of nonamphiphilic carbazole (CA) molecules mixed with polymethyl methacrylate (PMMA) and stearic acid (SA). pi-A isotherm studies of mixed monolayer as well as the remarkable change in collapse pressure of the mixed monolayer isotherms definitely show that CA is incorporated into PMMA and SA matrices. However, CA is stacked in the PMMA/SA chains and forms microcrystalline aggregates, as is evidenced from the scanning electron micrograph picture. The nature of these aggregated species in the mixed LB films has been revealed by UV-vis absorption and fluorescence spectroscopic studies. The presence of two different kinds of band systems in the fluorescence spectra of the mixed LB films have been observed. This may be due to the formation of low-dimensional aggregates in the mixed LB films. Intensity distribution of different band systems is highly sensitive to the microenvironment of two different matrices as well as also on the film thickness.
Abstract: This paper reports the pi-A isotherms and spectroscopic characteristics of mixed Langmuir and Langmuir-Blodgett (LB) films of nonamphiphilic carbazole (CA) molecules mixed with polymethyl methacrylate (PMMA) and stearic acid (SA). pi-A isotherm studies of mixed monolayer as well as the remarkable change in collapse pressure of the mixed monolayer isotherms definitely show that CA is incorporated into PMMA and SA matrices. However, CA is stacked in the PMMA/SA chains and forms microcrystalline aggregates, as is evidenced from the scanning electron micrograph picture. The nature of these aggregated species in the mixed LB films has been revealed by UV-vis absorption and fluorescence spectroscopic studies. The presence of two different kinds of band systems in the fluorescence spectra of the mixed LB films have been observed. This may be due to the formation of low-dimensional aggregates in the mixed LB films. Intensity distribution of different band systems is highly sensitive to the microenvironment of two different matrices as well as also on the film thickness.
Abstract: This communication reports the formation of complex Langmuir monolayer at the air-water interface with the water-soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules when interacted with the stearic acid (SA) molecules. The reaction kinetics of the formation of the CTAB-SA complex was monitored by observing the surface pressure versus time graph. Multilayered LB films of this complex doped with Congo red was successfully formed onto a quartz substrate. UV-Vis absorption and steady-state fluorescence spectroscopic characteristics of this doped LB films confirms the successful incorporation of Congo red molecules in to the CTAB-SA complex films.
Abstract: This communication reports the surface pressure (pi) versus area per molecule (A) isotherm characteristics of the mixed films of 9-phenyl anthracene (PA) in stearic acid (SA) and polymethyl methacrylate (PMMA) matrices, at the air-water interface. The mixed Langmuir films at the air-water interface have been observed to be easily transferred onto solid substrates to form uniform Langmuir-Blodgett films. By changing various parameters, namely molefraction, surface pressure of lifting and number of layers, the mixed Langmuir-Blodgett (LB) films of various types have been fabricated successfully and their spectroscopic characteristics have been reported. From the isotherm characteristics and the area per molecule versus molefraction plot, it is evident that the PA molecules are successfully incorporated into mixed Langmuir-Blodgett films. UV-vis absorption spectroscopic study of the mixed LB films at various molefractions of PA in two different matrices reveal that formation of I-type aggregate in PMMA matrix whereas both I- and H-type aggregates are playing their dominant role in SA matrix. Moreover, fluorescence spectroscopic study reveals reabsorption effect. Molecular movement persists in the freshly prepared LB films, as is evident from the time dependent changes in both UV-vis absorption and fluorescence spectra of the mixed LB films in both matrices. From our observation it is evident that about 200 h is required to get the LB films in a stable condition. Dimers and higher order n-mers are formed at a higher surface pressure of 30 mNm(-1).
Abstract: This communication reports the surface pressure (pi) versus area per molecule (A) isotherm characteristics of the mixed films of 9-phenyl anthracene (PA) in stearic acid (SA) and polymethyl methacrylate (PMMA) matrices, at the air-water interface. The mixed Langmuir films at the air-water interface have been observed to be easily transferred onto solid substrates to form uniform Langmuir-Blodgett films. By changing various parameters, namely molefraction, surface pressure of lifting and number of layers, the mixed Langmuir-Blodgett (LB) films of various types have been fabricated successfully and their spectroscopic characteristics have been reported. From the isotherm characteristics and the area per molecule versus molefraction plot, it is evident that the PA molecules are successfully incorporated into mixed Langmuir-Blodgett films. UV-vis absorption spectroscopic study of the mixed LB films at various molefractions of PA in two different matrices reveal that formation of I-type aggregate in PMMA matrix whereas both I- and H-type aggregates are playing their dominant role in SA matrix. Moreover, fluorescence spectroscopic study reveals reabsorption effect. Molecular movement persists in the freshly prepared LB films, as is evident from the time dependent changes in both UV-vis absorption and fluorescence spectra of the mixed LB films in both matrices. From our observation it is evident that about 200 h is required to get the LB films in a stable condition. Dimers and higher order n-mers are formed at a higher surface pressure of 30 mNm(-1).
